Videos

A step-by-step process to understanding the basic functionalities and screens that will be displayed on the Allied Edison ZX3. The ZX3 DC DC Ground Detection and Location equipment combines analog with digital technology, yielding the most innovative, advanced, ground detection and location machine in the world! #alliededison #electrian #nuclearengineering #electricalsafety #electricalproblems

Part 2 of the introduction to the ZX3 DC Ground Detection and Location Equipment This section of the video focuses on the hazards commonly encountered in the field or on site with prior DC ground detection equipment, and how the Allied Edison ZX3 is the best, and most affordable choice on the market for the safest equipment available for ground detection and earth faults. #electricalsafety #alliededison #safetyequipment

The Live Dead Live (LDL) Meter Verifier is a small, lightweight, robust, portable, handheld power supply. The LDL-1100 supplies just under 50 volts, AC (rms) or DC with a maximum current of less than 5 mA at rated voltage. supplies just under 150 volts, AC (rms) or DC with a maximum current of less than 5 mA at rated voltage. The LDL-1200 supplies just under 150 volts, AC (rms) or DC with a maximum current of less than 5 mA at rated voltage. The LDL-1100 & LDL-1200 Meter Verifier is specifically designed to facilitate voltage verification tests on most digital multi-meters, electronic voltage detectors, voltage testers, neon test lights, tic tracers and other commonly used electrical voltage test apparatus, while keeping the user as electrically safe as possible with its extremely low “volt-amp” output. #electricalsafety #electrican #electricalcontractor #solarpanels #nuclearsafety

Allied Edison VS-3 Power Supply: The VS-3 power supply is a very convenient portable, non-isolated “variable source” from 0 volts to 150 Vac or 0 volts to 150 Vdc and rated for up to 3 amps, thus the name VS-3. It is comprised of an illuminated voltmeter that reads to the first significant digit, AC variable system output voltage, DC variable system output voltage, logic output voltage and one sense (continuity) contact monitoring points. Banana jacks for connection of test leads are spaced at intervals that allow the use of dual banana test plugs if desired. The VS-3 is protected by two levels of overcurrent protection; AC input, and ground fault protection by a GFCI. All circuitry is housed inside a custom designed case made from 16 gauge steel. An Internal fan dissipates heat buildup and exhaust through louvered side vents built into the case. The carrying handle is designed with a “spring return to rest” position and is padded for comfort. The case has been sized for optimum portability and is balanced from the handle during transportation. The case has a powder coated finish that is scratch, chemical and weather resistant. Rubber padded feet support the case when in the upright position and a convenience receptacle is located on the side of the case. A unique feature of the VS-3 is that it contains “Magnet Packs” on the back of the case. These “Magnet Packs” can support the VS-3 and allow it to “hang” from any magnetic metal surface. The VS-3 can be powered by our UPS system, eliminating the need for an extension cord. The ability to magnetically attach the VS-3 near the source of connection and eliminating the need for an extension cord makes the VS-3 a “must have tool” for technicians. Allied Edison VS-10a Power Supply: The VS-10a power supply is a light weight, portable, non-isolated “variable source” from 0 volts to 150 Vac or 0 volts to 150 Vdc and rated for up to 10 amps, thus the name VS-10a. It is comprised of an illuminated voltmeter that reads to the first significant digit, AC variable system output voltage, DC variable system output voltage, logic output voltage and one sense (continuity) contact monitoring points. Banana jacks for connection of test leads are spaced at intervals that allow the use of dual banana test plugs if desired. The VS-10a is protected by two levels of overcurrent protection; AC input, and ground fault protection by a GFCI. All circuitry is housed inside a custom designed case made from 16 gauge steel. An Internal fan dissipates heat buildup and exhaust through louvered side vents built into the case. The carrying handle is designed with a “spring return to rest” position and is padded for comfort. The case has been sized for optimum portability and is balanced from the handle during transportation. The case has a powder coated finish that is scratch, chemical and weather resistant. Rubber padded feet support the case when in the upright position and a convenience receptacle is located on the side of the case. The UPS (Uninterruptible Power Supply): A light weight (7.2 lbs), portable, non-variable source that converts a 12 Vdc Lithium Ion battery to output 110 vac sine wave at 60 hertz. It also has four 12Vdc output jacks, and 4 USB ports to power electronic equipment such as computers or used to supply cell phone chargers, etc. It has a strong built in flashlight. The UPS plugs into a standard 120 Vac, 60 hertz receptacle for charging and indicates percent battery capacity remaining on a digital meter located on the front panel. The UPS can also be charged by a solar cell, sold separately or can be plugged into a vehicles cigarette lighter receptacle for use in remote areas. The UPS is an excellent compliment to the VS-3 power supply where a technician needs a variable AC/DC source and cannot run a power cord due to the remoteness of the work area. Please visit out website at www.alliededison.com to purchase, or for more information about our products. #powersupply #portablepowerstation #portablepowersupply #powersupplyrepair #electricaltools

Discover the critical importance of the Live-Dead-Live (LDL) test in electrical work with Allied Edison's innovative LDL Verifiers! This video delves into the essential procedure that ensures “Absence of Voltage” and the reliability of testing equipment, safeguarding electrical workers from electric shock hazards. Learn how the LDL test aligns with NFPA 70E standards and the importance of establishing an “Electrically Safe Work Condition.” We’ll explore how Allied Edison's patented technology enhances safety, convenience, and efficiency while performing the LDL test. With built-in features and a focus on minimizing risks, you’ll see why Allied Edison is a leader in electrical safety. Like and share this video to spread awareness! To purchase this product or for more information about Allied Edison's other safety products please visit alliededison.com #ElectricalSafety #LiveDeadLive #AlliedEdison #NFPA70E #Electricians #SafetyFirst

​ZX3 Ungrounded DC System Fault Detection and Location Equipment https://www.alliededison.com/product-page/allied-edison-zx3 In this video we will use an Allied Edison ZX3 to easily and quickly detect a DC ground fault at a power generating station. DC Ground Detector DC Ground Fault Detector DC Ground Fault Locator DC Ground Locator DC Ground Check DC Fault Locator Battery Ground Floating Battery System Ground Fault Detector Earth Fault Ground Fault Electrical Ground Fault Locator Solar Earth Fault Solar Module Ground Fault Solar Module Test Solar Panel Insulation Resistance Test Earth Fault Locator Earth Fault Detector Earth Battery Battery Free Energy Off Grid Solar Off Grid Battery DIY Solar Battery Storage DIY Battery Storage

Watch this short demonstration to see how Allied Edison's PGS operates when locating a ground by seeing through a conduit! This powerful PGS feature can save valuable hours in opening junction boxes and clamping conductors. As you will see the PGS base or stationary unit has a power switch, a 3 position mode control switch, current gain control, a slow/fast switch and a display, along with its power connection leads. It will operate on DC systems from 24 Volts to 240 Volts DC. To order your PGS or for more information about the portable ground search system click our product page below: https://www.alliededison.com/pgs-dc-ground-fault-detection-location-system

Watch actual footage of a real ZX3 demonstration simulated to locate a water intrusion and ground fault! For more ZX3 information please visit: https://www.alliededison.com/ae-zx3-ground-machine

See an actual Live-Dead-Live test with Allied Edison's LDL 1200 Meter Verifier. Order Yours Today Here: https://www.alliededison.com/ldl-1200-live-dead-live-verifier